North America market round flush mount dimmable led surface mount ceiling light
Our factory accept sample order, welcome to contact us.
24W Dimmable LED Flush Mount Ceiling Light
The product installation requires knowledge of luminaries electrical systems.if not qualified,do not attempt installation.Contact a qualified electrician.
This device is not intended for use with emergency exit fixtures or emergency exit lights.
Not for use where exposed to the weather.
Suitable for Damp Locations.
Warning - To avoid possible electrical shock,be sure that power supply is turned off at fuse box or circuit breaker before installing fixture.
Warning - Risk of fire or electric shock.Don not make or alter any open holes in an an enclosure of wiring or electrical components during kit installation.
Suitable for qualified hard wire installation into a standard 4" junction box.
1.Turn two screws(included) into the junction box before installation.
Do NOT drive screws completely to the end of the junction box.
2.After wiring,push the fixture up over the screws and turn it so the screws slide along the slots which holds the fixture in place.
Fasten the screws.
3.Complete the installation by installing the diffuser onto the fixture with 3 screws caps.
Sample order is available, welcome to contact us if you are interested.